Room set photography may include products from the same range but may not be the design or colour you are currently viewing.
Cambridge (B) with Rochester victorian floor tile design
The checkerboard pattern is timeless, classic and ever popular. Simply take squares of the same size in two colours for the traditional chessboard style. The 151mm/6” square pattern can be used for maximum coverage on large expanses of floor. Turn the page for the same pattern made from 106mm/4” squares.
Cambridge (B) an original style design made up of various colours: buff and green in different shapes: squares.
Contact our friendly team to get help with quantity estimations; main patterns are priced per square metre, borders designs are priced per linear metre but sold in any quantity without a minimum order value or quantity.Traditional check using 151mm/6” squares in the colours of your choice. It is set at 90˚ to the border/wall. Shown here with a Rochester border Rochester border is made up of 3 colours (Red, Green, Buff), 3 shapes (rectangles, squares, triangles) and 4 sizes (151x24x9, 53x53x9, 73x52x52x9, 151x75x9mm)
. An important factor when you are choosing a framing border is the width, this is 181mm which we have classified as a medium border. This is only a single suggestion, you can choose another border, mix colours, add other shapes or simply make up your own by combining individual tiles..
- Suitable for: Hallways, kitchens, porches, pathways, conservatories, bathrooms, public areas, vestibules and more...
- Grout: recommended gap is 2mm and a light grey cement based grout colour
- Fixing: Ensure tiles are clean and free of dust and dirt; seal the individual tiles before any installation commences
- Application: Indoor/Outdoor
- Pattern variations: Other colour combinations available
- Finish: Unglazed / Matt
TECHNICAL DETAILS (main points):
Suitability: Most commercial applications, interior, exterior heavy domestic locations. If in doubt please refer to our technical department for further advice
Description: dry pressed ceramic tiles with low water absorption 0.5 - 3%, vitrified.
Slip resistance: R10
Working tolerances: 0.75% - 1.2%
Mohs scale surface resistance: 7
Chemical resistance: conforms to standard BS EN ISO 10545-13
Thermal shock: conforms to standard BS EN ISO 10545-9 1996
FITTING INSTRUCTIONS (main points):
These tiles are unglazed, we recommend that they are sealed.
Recommended grout gap 2mm; they have to be grouted with a grey cement based grout suitable for your application.
Recommended tile adhesive - click link below.
|Application:||Walls & Floors|
|Suitability:||Indoors & Outdoors|
|Tile size category:||Small|
|Collection:||Victorian Floor Tiles|