Room set photography may include products from the same range but may not be the design or colour you are currently viewing.
Conway (B) with Browning victorian floor tile design
The patterns shown here are increasing in complexity with the introduction of the non equilateral triangles. This most useful shape works well with the square. The triangles are also often used when making up border patterns.
Conway (B) an original style design made up of various colours: red, black, buff, brown, white in different shapes: rectangles, squares, triangles.
Contact our friendly team to get help with quantity estimations; main patterns are priced per square metre, borders designs are priced per linear metre but sold in any quantity without a minimum order value or quantity.Conway’s grid pattern is on the diagonal, similar to Fotheringhay. Shown with modified Browning border. Browning border is made up of 5 colours (Red, Brown, Buff, Black, White), 3 shapes (rectangles, squares, triangles) and 5 sizes (151x24x9, 53x53x9, 50x36x36x9, 104x73x73x9, 151x75x9mm)
. An important factor when you are choosing a framing border is the width, this is 239mm which we have classified as a medium border. This is only a single suggestion, you can choose another border, mix colours, add other shapes or simply make up your own by combining individual tiles..
- Suitable for: Hallways, kitchens, porches, pathways, conservatories, bathrooms, public areas, vestibules and more...
- Grout: recommended gap is 2mm and a light grey cement based grout colour
- Fixing: Ensure tiles are clean and free of dust and dirt; seal the individual tiles before any installation commences
- Application: Indoor/Outdoor
- Pattern variations: Other colour combinations available
- Finish: Unglazed / Matt
Tiles used in Conway (B)
TECHNICAL DETAILS (main points):
Suitability: Most commercial applications, interior, exterior heavy domestic locations. If in doubt please refer to our technical department for further advice
Description: dry pressed ceramic tiles with low water absorption 0.5 - 3%, vitrified.
Slip resistance: R10
Working tolerances: 0.75% - 1.2%
Mohs scale surface resistance: 7
Chemical resistance: conforms to standard BS EN ISO 10545-13
Thermal shock: conforms to standard BS EN ISO 10545-9 1996
FITTING INSTRUCTIONS (main points):
These tiles are unglazed, we recommend that they are sealed.
Recommended grout gap 2mm; they have to be grouted with a grey cement based grout suitable for your application.
Recommended tile adhesive - click link below.
|Application:||Walls & Floors|
|Tiles per square metre:||multiple|
|Tiles per box:||multiple|
|Price info:||per m²|
|Pattern colours:||3 colours|