Warm, even floors with slim build-up and simple controls. Choose the right system for your room, pick 150W/m² or 200W/m², and order complete kits with smart thermostats. Kent showroom support and fast UK delivery.
- BEAB-approved brands (e.g., Heat Mat)
- Help choosing 150W vs 200W for your room
- Thermostats, insulation boards & levelling included
- Showroom advice in Rochester, Kent
Tip: 150W/m² suits well-insulated rooms and everyday comfort; 200W/m² helps in colder spots and faster warm-up.
Underfloor heating
Choose the Right System for Your Floor
Tiles & Stone
Heating mats or loose wire under tile with leveller for smooth finish.
Vinyl & LVT
Foil or low-profile solutions; check manufacturer max temps & build-up.
Laminate & Engineered Wood
Dry-install foil mats with correct underlay and temperature limits.
Irregular Rooms / New Builds
Loose wire for tricky shapes; in-screed cables for larger thermal mass.
150W vs 200W — What Output Do You Need?
- 150W/m²: everyday comfort in insulated rooms; typical kitchens/bathrooms.
- 200W/m²: quicker heat-up and colder areas; conservatories and higher heat-loss spaces.
- Use insulation boards to reduce heat-up time and running costs.
- Smart (Lot 20) thermostats improve control and efficiency.
Installation Notes & Safety
- Prepare subfloors; prime and level where required for a flat finish.
- Place the floor probe centrally between runs and avoid crossing wires.
- Final electrical connections should be completed by a Part P-qualified electrician.
- Follow brand manuals for first heat-up and commissioning.
Where Electric UFH Works Best
- Bathrooms & ensuites (fast warm-up)
- Kitchens & open-plan spaces
- Conservatories (consider 200W/m² and insulation)
- Retrofits with height limits (low build-up options)
Electric Underfloor Heating FAQs
Can electric UFH be my primary heating?
Yes in well-insulated rooms with adequate output (often 150–200W/m²). Use insulation boards and a smart thermostat for best results. Conservatories or high heat-loss spaces may need 200W/m² or supplementary heat.
What’s the difference between 150W/m² and 200W/m²?
150W/m² suits most indoor rooms with standard heat loss; 200W/m² offers faster warm-up and helps in colder or intermittent spaces. Always consider floor coverings and manufacturer temperature limits.
Which systems work with vinyl, laminate or engineered wood?
Foil systems or low-profile solutions are common. Always check the floor manufacturer’s maximum surface temperature and installation guidance.
Do I need an electrician?
Yes — final connections should be completed by a Part P-qualified electrician. Follow brand manuals for testing and commissioning.
How much will it cost to run?
Costs depend on tariff, insulation, setpoints and usage hours. Insulation boards and smart controls help reduce consumption.
