Room set photography may include products from the same range but may not be the design or colour you are currently viewing.
Stornoway with Woolf victorian floor tile design
- Brand: Original Style
- Product Code: OSVFT-STO-WOO
- Availability: Normally in stock
- Pattern colours: 1 colour
| Room length: (m) |
|
|
| Room width: (m) | ||
| Area: (m2) |
- The results include 10% for wastage.
- Please fill in the room measurements to find out the estimated quantities of tiles, adhesive and grout.
- We advise that the tiler finalizes the number of tiles required.
- No claims can be accepted.
Calculating the area manually: For floors, you need to times the length by the width of the floor area you need to tile, the result being the square meterage (sq foot) of the floor. Example: Floor width 3m Floor-length 4m Area to be tiled; 3m x 4m = 12 sqm(square metres) Wastage should be allowed for ( breakage, cuts, etc...) at a rate of 10%.
Classic herringbone patterns are simply made from one or more rectangles, depending on the effect you want to achieve. The addition of a narrow rectangle adds decorative detail while changing the piece sizes and adding another colour provides a bolder.
Stornoway an original style design made up of various colours: dover white and grey in different shapes: rectangles.
Contact our friendly team to get help with quantity estimations; main patterns are priced per square metre, borders designs are priced per linear metre but sold in any quantity without a minimum order value or quantity.
Two different sizes of rectangle make up this chevron effect. Why not add more interest with a Woolf border made from triangles (shown). Woolf border is made up of 2 colours (Dover White, Grey), 2 shapes (rectangles, equilateral triangles) and 2 sizes (151x53x9, 104x104x104x9mm). An important factor when you are choosing a framing border is the width, this is 201mm which we have classified as a medium border. This is only a single suggestion, you can choose another border, mix colours, add other shapes or simply make up your own by combining individual tiles..
- Suitable for: Hallways, kitchens, porches, pathways, conservatories, bathrooms, public areas, vestibules and more...
- Grout: recommended gap is 2mm and a light grey cement based grout colour
- Fixing: Ensure tiles are clean and free of dust and dirt; seal the individual tiles before any installation commences
- Application: Indoor/Outdoor
- Pattern variations: Other colour combinations available
- Finish: Unglazed / Matt
View more Victorian Mosaic Main patterns | Matching Victorian Borders |Original Style Patterns
Tiles used in Stornoway
TECHNICAL DETAILS (main points):
Suitability: Most commercial applications, interior, exterior heavy domestic locations. If in doubt please refer to our technical department for further advice
Description: dry pressed ceramic tiles with low water absorption 0.5 - 3%, vitrified.
Slip resistance: R10
Working tolerances: 0.75% - 1.2%
Mohs scale surface resistance: 7
Chemical resistance: conforms to standard BS EN ISO 10545-13
Thermal shock: conforms to standard BS EN ISO 10545-9 1996
FITTING INSTRUCTIONS (main points):
These tiles are unglazed, we recommend that they are sealed.
Recommended grout gap 2mm; they have to be grouted with a grey cement based grout suitable for your application.
Recommended tile adhesive - click link below.
| Pattern info | |
| Pattern colours: | 1 colour |
| Type: | Main design |
| Complexity: | Simple |
Tags: Stornoway , Woolf , Original Style , Victorian Floor Tiles designs , Classic Checks